Creality CR-10 auto level z probe plastic case replacement

replacement for the plastic case around the Creality CR-10 probe, the board is designed to just have a couple dabs of glue hold it in place, its designed for 4 m2x20mm screws to hold it all together. (I recommend just printing the revision 2 version of the half that mount to the printer, that design is made for 2 m2x20mm and 2 m2x16mm screws.) The distance of the probe from the bed seems to be a little tricky to get just right, so in case other setups are a little different and to make a quick fix, i just made spacers for mounting it to the printer. if you install it without any spacers it may bottom out on the nozzle so be careful.... thats how i broke my case in the first place. you'll need longer m3 screws to mount it with the spacers is a downside to that. printed with PLA, 0.4mm nozzle youtube link https://www.youtube.com/watch?v=ZBanCcTGsZY