Creality K1 - Door Cover (all in one)

For this build, you will need 9mm wide foam tape with thickness 4mm. PLA should be good enough for this print. In normal conditions, the bottom of the chamber never reaches a temperature above 60°C. -------------------------------------------------------------------------------------- Recommended Print Settings No supports Nozzle : 0.4 Layer height : 0.2 Perimeters : 3 Top/Bottom layers : 4 Infill : 20% -------------------------------------------------------------------------------------- Add Makes & Comments guys 👍 If you like my work consider buying me a ko-fi ☕😊 Your support is greatly appreciated.