Creality K1 Hinged Lid Riser - Left Side

I loved the concept of a hinged lid for the K1, but needed it to hinge open on the left to work for my specific space. You will still need components from the original model to convert to a left side hinge. The pieces you won't be using from the original are the back right hinge near the cable/bowden inlet, and the front left lid riser. I remixed the original back left hinge by mirroring to create a new hinge for the back left turned sideways (this was to remove the cutouts for the wiring as I need as enclosed as possible for things like ASA/ABS). The original back left hinge now moves to the front left with no modifications needed. I then needed to make a small cutout of a new back right solid lid riser, so copied the angle from the original back right piece onto the existing design (small cutout on the bottom left to accomodate wire). Bonus: If you have freed your bowden tube from the cable chain, the original rear betweener won't fit right. I took the original and made a small cutout for the slightly higher bowden tube to feed in from the back.