Creality K1 & K1 Max Toolhead Cover/Shroud with LIDAR gap
by TrueBlueRoo · via Printables
| Format | STL |
| Category | Art |
| License | CC BY-NC-SA |
| Triangles | 32.6k |
| Uploaded | Jan 10, 2024 |
⬇ 469 downloads
❤ 75 likes
👁 3.2k views
Description
This remix was made because every single time I change a nozzle I had to unplug the cable from the LIDAR and put it back in again. That was every single time quite time intensive and the plug was prune to bending the pins. Reforcements were added to make it less breakeable. Printed with ABS and small tree support. Edit: PETG struggled and I did it now in ABS. Please ensure in the slicer that the tree support supports the whole top. Many thanks to @DerrickDarrell for creating the original model for this remix.
AI Analysis: This is a mechanical part designed to protect the toolhead of a printer. It features a yellow casing with a circular opening for the LIDAR sensor and is attached to a metal rod. The part is labeled with 'K1' and 'K1 Max' indicating compatibility with Creality's K1 and K1 Max printers. It serves as a protective cover for the toolhead while also housing the LIDAR sensor, which is used for precise measurements during .
Originally published on Printables
