Creality K1 Shallow Riser 11mm high - Less then 100 GRAMS!

Differences of the remix compared to the original I took an already remixed version, from the1maximus, I really liked how he had created Betweeners that matches the corner profiles. I didn't need the LED 45 degree mountings so I removed those and wiring box. I adjusted the rear panel so it will cover over the wires in aid of sealing the chamber. I then made the whole thing more shallow. I didn't need that much height from a riser, just enough to get the Bowden tube off the lid. So it rises by 11mm which doesn't sound much but thats all I think is needed. Rises the lid by 11mm which is enough to get the Bowden tube off the lid! It does need support in the slicer (see photos) Couple this with some M3 x 16mm Socket Head Screws and this will mount to the top of the K1 & hold down the lid magnetically. Uses 99 grams of filment (ABS) !!! the1maximus uses 187 grams Thats 47.62% difference in less materials!