Creality K1C Door Seal

Seal for lower front door area of Creality K1C. This part might be helpful when printing materials like ABS or ASA where cold air flow can impact the print. I used to stick a towel in the gap but ultimately created this. I tried to fit this as tight as possible while still allowing some print or material tolerance. The left part of the split version was not causing me any trouble when opening the door. Because of print orientation I could not find an easy way to interlock the parts. Nevertheless if that part is coming loose easily using a very light adhesive might be advised. Models: Default model is two separate pieces. Use the auto align function in the Slicer application and no support will be required. With access to a larger tool changer or dual nozzle this can easily be printed in one piece using two different materials. Recommended and tested material/print settings: TPU-95A (plus PLA to support the single piece) 0.2mm layer height