Creality Space Pi Fillament PC4-M6 Exit Adapter

This mod adds a second filament exit to the back of the Creality Space Pi Dryer Box, giving you a cleaner and more flexible filament path. Designed to be printed in TPU and press-fitted directly into a 10mm hole, no glue or screws needed. You can install it in two orientations: Straight back (pulling from the top of the spool) Straight up (for vertical setups) Features Dual-orientation filament exit (back or top) Clean and direct filament path Press-fit design, no adhesives required Tight TPU seal for a firm and secure hold Minimal and reversible install Installation Drill a 10mm hole 20mm below the original vent hole Press the part into place Printing 🧵 Material: TPU (95A recommended) 📏 Layer height: 0.20 mm 🧱 Walls: 3–4 perimeters 🔳 Infill: 100% ⚡ Print speed: ~20 mm/s 🌡️ Nozzle: ~220 °C 🔥 Bed: ~50 °C 🧲 Supports: not required Notes TPU is required for proper press-fit and sealing PLA/PETG will not hold securely This mod requires drilling the acrylic panel