Creepy Halloween Spider (Easy Print)

I found that the original models had poor bed adhesion on the legs and often failed there. I added “toe tabs” to the end of each leg which can be twisted off after the print is completed. These dramatically reduce print failures. I also added and additional hole perpendicular to the Makamaka remix to allow multiple ways of hanging the spider. Just like the originals, these spiders print flat. Use a hair dryer or heat gun to shape the legs into dynamic poses. Suitable for free standing or hanging display. All example photos show prints at 150-200% upscaling. Print settings I recommend printing these spiders at ~200% size 0.2 Layer height 2-3 walls 10% infill No supports