Customizable Low Poly Bowl

This is a more customizable version of the low poly bowl by Markus. As a starting point for customization, you can closely match that model by setting wt=5.0; sides=10; h=37.5; od=157.5; bend_height=13.5; bend_angle=33; and r=2.0; I mostly wanted to be able to do smaller bowls/thinner walls, but it should work fine for making larger bowls, as well. The model supports going as low as 3 sides, but the result lacks much of the interest of higher side counts. Unless the bend_angle exceeds the overhang your printer can do at the chosen layer height, no supports are needed.