Customizable puzzle of evil

This Evil Puzzle will keep you busy for many many hours. Simply place the four puzzle pieces within the available space. There is an easy and a hard option. Credits & Features This design is based on hairyfacedhoomans puzzle , where i adjusted some things: Increased wiggle in the hinge to improve opening/closing the clamshell recessed the magnets (two layers or .4mm of “cap” on the magnet so they dont show) changed magnet size to height 2.7mm, diameter 6mm (the ones i had available) added text on both sides of the clamshell design, in case you want to use it as a present Customization Use OpenSCAD to change the magnet size and text! Just put the .scad and the “evil_puzzle_-_no_magnets.stl” file in a folder. Then start OpenSCAD. Text customization: Change the variables: text1=" Dear Friend,"; 📷 Image redacted — claim this model to add your own media Printing Recessed magnets: Make a material change at layer 29, at 5,8mm (when you print with .2mm layer height): 📷 Image redacted — claim this model to add your own media When the printer stops, put in the magnets and fix them with a drop of superglue. With the two layers the magnets are barely visible: 📷 Image redacted — claim this model to add your own media