CyberDemon Can Holder / Beer mug (two types)

Cyberdemon Can Holder (two types) Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Automatic Tree supports (at least 26°), block supports inside the mouth - behind the teeth. Be careful with the supports , remove them very carefully in the area of the teeth. I recommend using small pliers . #1 📷 Image redacted — claim this model to add your own media #2 📷 Image redacted — claim this model to add your own media Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans , and 10mm riser if you want better access to the top . Both are scalable, so you can make them smaller or larger in your slicer. https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable Happy printing:)