Delack rear cover with MMU tube slots

This is a modified rear cover for the Delack with holes for the PTFE tubes for your MMU. You can mount it one of 4 different ways by turning it depending on where your buffer is. Seems to make the bend in the tubes less dramatic. This cover is a little thicker than the original and you will need some slightly longer screws to mount it. I printed this with PETG with 15% infill. All credit goes to the originals I borrowed from: Photon for the MMU holes used in the top skirt rear and 3D Sourcerer for the excellent Delack enclosure and parts.