Desiccant Containers for EzyStorage 19 Quart Totes

These are containers that will fit in the grid section of the EzyStorage 19Qt. Lids. With the help of some spacers/clips they stay in nice and tight. They can be filled with silica desiccant, and I added some color indicating beads to each so I can see through the lid of the tote when they need to be dried. The lids slide on and there are nubs at each end of the container to keep them from accidentally coming off. I printed these out of clear ABS, but I'm sure Clear PETG or similar would be sufficient enough to withstand the temperature of drying in a filament dryer. For the spacer clips, I used fuzzy skin, (1mm Point Distance and 0.2mm Thickness) only on the inside faces to add a gritty texture so they grip the tote lid don't come off easy. The smaller size of the spacers are wider on one side than the other, as there wasn't room for another equally sized spacer. The thicker side faces towards the outside of the tote lid.