Desiccant (Silica Gel Bead) Container with Hygrometer - FAST PRINT

About This container holds small silica gel beads efficiently and securely. It is designed to print fast while still allowing for good airflow. There is an optional lid version that fits a hygrometer. Lids screw on easily and securely. 3D Print design considerations Basket weave pattern - Designed to have two wall loops. This pattern reduces print times significantly by preventing frequent retractions found in other designs. 1h 34m for large container + regular lid on Bambu Lab P1S. Lip on thread - Container is designed with a lip to facilitate screwing on the lid. Tough - Weave pattern resists being squeezed or handled roughly. Easy print - No overhangs, no support. Layer Height - Designed to print effectively at a .2mm layer height. Z-seam - location is randomized to enhance print quality. Remix info Adds slots to the hygrometer lid to fit hygrometers with tabs. Without these slots, a hygrometer will not fit (or will only fit very tightly) into the lid. Print Settings Printed on Bambu Lab P1S. Make sure that it prints with two wall loops for toughness. Bambu Studio print settings: X-Y contour compensation = -0.2 mm ( ONLY for plain lid and hygrometer lid ) Brim = 7 mm inner brim ( ONLY for hygrometer lid ) Layer Height = 0.2 mm Nozzle = 0.4 mm