Desk Clamp Feet for Easy Print LED Light Bridge

A simple clamp foot to secure the 170mm version of the Easy Print LED Light Bridge / Arc by Andy D to a 22mm thick IKEA Skarsta desktop. It slots on smoothly without any wiggle room or bending, so if you happen to have this specific desk you may not even need the bolts. Should also work for other desktops of the same 22mm thickness or thinner. The tolerance on the bolts may be pretty tight depending on your overhang performance if printed in the default orientation, so I've included a "tight" and "loose" version of the bolt. The foot should be printed on its side, no need to mirror unless you'd like the plate-side or top surface to face in/out on both sides. The bolts can be printed in their default orientation. Pictured prints use Deeplee Rapid PLA+ at 0.2mm layer height with 10% gyroid infill and 2 walls. Seems strong enough after a couple days with occasional bumps/adjustments. If there's any interest I'm happy to provide the .f3d files or make a wider bracket/longer bolt for thicker desk surfaces.