Desk Lamp GX53

GX53 Desk Lamp This is a minimalist 3D-printed desk lamp designed for GX53 bulbs. The model is simple, compact, and easy to assemble using common electrical components. The design was inspired by modern 3D printed desk lamps with clean lines and hidden cable routing, but adapted to use a GX53 socket and standard mains wiring. Features Designed for GX53 LED bulbs Minimal and modern design Hidden cable routing Slot for a small inline switch (21 × 15 mm) Optimized for easy 3D printing Simple assembly with minimal parts Required Parts To assemble the lamp you will need: GX53 lamp holder GX53 LED bulb Power cable 2 × 0.5 mm² Inline switch (21 × 15 mm) Power plug suitable for your region Assembly Insert the GX53 socket into the lamp head. Route the 2×0.5 mm² cable through the internal cable channel. Install the inline switch (21×15 mm) into the dedicated slot. Connect the socket and switch according to your local electrical wiring rules. Install the GX53 bulb and close the lamp body. Notes Designed for LED GX53 bulbs only. Do not use high-power halogen lamps. Always disconnect power before working with electrical wiring.