Dewalt 20V/60V Tool Contacts Cover

UPDATE: 17-Feb, 2024 @seanauff_1590030 pointed out that the 20V contact cover was a tight fit when used to protect the battery charger contacts. I have DCB112 and DCB115 battery chargers. These have an indexing tab that fits a notch in the battery. I have added a slotted version of the 20V contact cover for use with the battery chargers. This cover should work with other 20V Dewalt chargers. Note that the 60V flexvolt batteries have two indexing slots so the dual voltage chargers may need a second slot. I missed this because I had used a prototype with squared off top that stopped short of the indexing tab on the chargers. Original Post This is a remix of BurningTreeCorpse 's Dewalt tool mount https://www.printables.com/model/203909-dewalt-tool-mounts I keep my cordless tools in bags/boxes/totes for easy transport. I needed a way to protect the battery contacts on the tools when the battery is removed. There are two versions, one for the 60V Flexvolt tools and one for the 20V tools. Printer: Ender 3 S1 Pro Walls: 3 Infill: 10% Filament: PLA & PETG - whatever end rolls were on hand