Drawer underdesk for Ikea Bekant

This is a remix of three different very great designs - Thanks to @Jerrari , @h3artl3ss362_24751 and @celta The drawer is designed to fit under the BEKANT table, add extra storage space while still providing an mounting point for the mesh. Check first if you have a clearance of at least 23cm from the metal frame to the front edge of the table top. Print hints: printed with 0.4 nozzle at 0.3mm layer height drawer looks better with 0.2mm layer height no supports needed for more contrast on the label you can change color during print Material 4x Magnets 10x5x2mm or 10x2mm for automatic closing (optional) 4x (up to 8) Wood screws countersunk M4x13mm max! longer screws might come through the top surface of the desk plat! 3x M3 bolts and M3x8mm nuts Mounting hints insert the nuts in the rail before mounting it on the table put in the magnets only a bit to test polarity - in case you put it in wrongly you can use the holes on the bottom to get them out again