DREMEL drill press

This model is a REMIX of 3Deddy's model from Thingiverse: https://www.thingiverse.com/thing:4148260 It's modified to fit the Prusa MK3S+ printer and it has several improvements : Smaller base, so it can fit to the printer bed Divided plate on the base, so you can print it directly on the bed and it will have a nice flat surface Divided Dremel 4000 holder, so it can fit to the printer Cap for the pipe Modified kable guide Print settings PETG 0,2 mm 15% infill Supports are needed for most parts BOM: Aluminum (or steel) pipe - 22 x 2 mm (cut 2 pieces: 350 mm and 250 mm) 625ZZ bearings - 5 x 16 x 5 mm (6x) M5 Nuts (13x) M5 Washers (11x) Hex head screws: M5 x 45 (1x) M5 x 30 (6x) Socket hex head screws: M5 x 30 (3x) M5 x 20 (4x) M5 x 15 (1x) Flat hex socket head screws: M5 x 20 (4x) M2 x 6 (1) You can buy the parts from Accu Components: BOM Assembly: Mount plate to the base by 4 flat hex socket screws: 📷 Image redacted — claim this model to add your own media Mount 350 mm pipe to the base by M5 x 30 screws (3x), M5 nuts (3x) and washers (6x): 📷 Image redacted — claim this model to add your own media Assemble bearings and vertical guide by socket hex head screws M5 x 20 (4x), M5 x 30 (2x) and 6 nuts: 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Mount 250 mm pipe to the Dremel holder by M5 x 30 screws (2x), M5 nuts (2x) and washers (4x): 📷 Image redacted — claim this model to add your own media Mount the top cap to the Dremel holder and 250 mm pipe by M5 x 30 socket hex head screw, then mount the cable guide by M2 screw: 📷 Image redacted — claim this model to add your own media Put a vertical guide to the pipe of the Dremel holder: 📷 Image redacted — claim this model to add your own media Assemble the vertical guide to the 350 mm pipe on the base by vertical guide lock knob, M5 x 45 screw, and nut. Then add a cap to the top of the pipe: 📷 Image redacted — claim this model to add your own media Glue together the lever and prepare the lock knob for the lever, M5 x 30 hex head screw, washer, and nut: 📷 Image redacted — claim this model to add your own media Assemble the lever (M5 x 15 screw): 📷 Image redacted — claim this model to add your own media Mount the DREMEL: 📷 Image redacted — claim this model to add your own media