Drilling Bounding Ring

When I needed a depth limiter for the drill, I downloaded models from other authors. These are interesting models with a collet lock. But in fact, they were useless, because the fixation on the drill was insufficient and the limiters simply slipped, especially when working with the hammer drill. So I created my own drilling depth limiter design. I made three of the most popular diameters for drilling with a hammer drill 6-8-10mm. However, you can use the source file to modify it for yourself. The model is printed without support, print in place. To complete it, you will need: M4x12mm Hexagon Socket Screw and M4x7x2 Square Nut. Parts links below: M4x12mm Hexagon Socket Screw M4x7x2 Square Nut Multi-function 18 In 1 Universal Wrench Keychain Useful Links: Heating Tube 12V/24V 70W High Temperatu Noulei silk PLA Filament Trianglelab Highall-metal V6 Hotend Deburring Burr Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 15 Filament: PolyMaker PLA Notes: The filling of 15% in my case was sufficient for the material to retain strength and be elastic when the lock is compressed. Category: Machine Tools