Dummy 13 Ballistic Shield and Greataxe

SHIELD IDEALLY PRINTED AT 0.2mm WITH 5% INFILL- SEE GCODES FOR MK3S PRINTERS Looking through some of my old models for inspiration, I found a huge axe and shield. I modified them a bit and made them better, and here we are. The axe comes in three pieces; the handle, the blade, and the pommel. The pommel also fits onto the handle of the shield, if you want it to. The shield was made to be printed all in one piece, but I also included a split version in case yours prints with a flimsy handle or something. It needs a little glue since it's so large. There's two shield types: one with a lower midsection for easier printing, and one with a raised midsection that's a bit harder. Due to a lot of bridging, I included some print files from my printer (MK3S) so you don't have to fiddle with exact supports. The lower ones might have some slight bridging issues depending on your printer, but it's easy enough to file down. THERE ARE FOUR OF EACH SHIELD: LEFT HANDED/RIGHT HANDED, AND SINGLE PIECE/2 PIECE VARIANTS. More models coming soon, I've been super busy and a bit low on inspiration, but hopefully I'll have a new full-body conversion out before Christmas. Update 12/4: Updated the handles slightly, added a longer two-handed blade variant, also a flat blade.