E3NG V1.2 Fysetc Portable Input Shaper Adapter

Fysetc portable input shaper board adapter for the E3NG V1.2 4010 and 4020 toolheads. BOM: - 2x M3x5 - 2x M3x25 Instructions: Screw down the Fysetc board to the bracket using the 2 M3x5 screws. Remove the original M3x20mm screws from the lower half of the toolhead. Place the adapter into the holes where the screws were and insert the M3x25mm screws through the adapter and toolhead. Done