Easy Barrel Quick Swap Mod / MEGA / SCAR / BCAR ___ Dart Zone Max Solo

Easy Barrel Quick Swap Mod / MEGA / SCAR / BCAR ___ Dart Zone Max Solo You can easily attach via quick swap a SCAR, a BCAR, a barrel or an attachment. It works with the stock barrel or other 16mm outer diameter barrels. Attachments with the thread from the Silly Spigot SCAR can be screwed on. Attach a suitable o-ring between the two threaded parts at the 16mm barrel to fix and seal it . My favorite combination is the stock barrel + the MEGA Dart Launcher ‘Silencer Style’. You can shoot half darts (Elite darts too, of course) through the Launcher and frontloaded MEGA Darts with this configuration. It even can shoot a MEGA dart (or 2x half-MEGA) when a half dart (or Elite) is already loaded. Stock Dart Zone aluminium barrel (7,2cm) maximum FPS test (red X-Shot short darts): DZ barrel = 110 FPS DZ barrel + Silly SCAR = 103 FPS DZ barrel + EX BCAR2 = 106 FPS DZ barrel + MEGA Dart Launcher ‘Silencer Style’ = 63 FPS__MEGA dart DZ barrel + RIVAL Launcher = 62 FPS __RIVAL ball Printable barrels maximum FPS test (red X-Shot short darts): 13 cm barrel = 125 FPS 10 cm barrel = 120 FPS 7 cm barrel = 110 FPS 13 cm barrel +EX BCAR2 = 117 FPS I've added a few printable barrels that worked really well for me. Please deburr the inner edges of the barrels with a small file on both sides. MEGA-XL darts do NOT work with the Max Solo and the Silly Spigot SCAR due to the lack of power and air volume. The files are already pre-oriented. My print settings for PLA: 0,2mm layer height 4 walls 20% gyroid infill 7 top and bottom shell layers Thanks to Sillybutts and DuBois for the files I could use for this remix.