Easy Bolt Action + T-Pull Mod X-Shot Fury-X (simply slide over the picatinny rail)

UPDATE: additional versions with EXTENDED bolts ------------------------------------------------------------ Easy Bolt Action Mod ---> X-Shot Fury-X To make the FuryX, bolt action or T-pull primeable - just slide it over the rear picatinny rail and fix it with the 3D printed pin. Because this attachment covers the sights of the blaster I have put some new sights on the top of it (with holes for some small pieces of colored 1,75mm filament for better visibility). For the left-handed people I also added a mirrored version of the bolts. Other Fury-X stuff can be downloaded here. Update 19.1.2025: I added a Version with T-pull: → FuryX_T-Pull ___________________________________________________ Update 23.1.2025: I added some bolt-action versions with bolts farer ahead placed in the middle of the blaster: → FuryX_Bolt_FRONT_(both_sides) → FuryX_Bolt_FRONT_(left_side) → FuryX_Bolt_FRONT_(right_side) ___________________________________________________ Update 15.3.2026: I added some bolt-action versions with EXTENDED bolts: → FuryX_Bolt_FRONT_(both_sides)_EXTENDED → FuryX_Bolt_FRONT_(left_side)_EXTENDED → FuryX_Bolt_FRONT_(right_side)_EXTENDED → FuryX_Bolt_REAR_(left_side)_EXTENDED → FuryX_Bolt_REAR_(right_side)_EXTENDED I've also added an OPTIONAL Ball_Knob suitable for the versions, called FuryX_Bolt_FRONT. This can be attached to the bolt and secured with superglue. Please try it out to see if you like it before gluing it on. I personally find it quite comfortable to grip. ---------------------------------------------------------------------------------------------------------------------------- The files are already pre-oriented: My print settings for PLA: 0,2mm layer height 7 walls 30% gyroid infill 7 top and bottom shell layers NO supports needed (the optional Ball_Knob needs supports!) use a brim if you have poor print bed adhesion! If the pin is too loose or too wide due to printer tolerances, scale it a tiny bit up or down in your slicer (but DO NOT scale the length). Thanks to Chance for the file I could use for this remix.