Easy pull-through belts for the "One For All" cable straps, for FLEX/TPU materials

Extrutim's overall design is awesome of course, his focus is on PLA, though. I print the clamps in PETG and the belts in TPU, but found it difficult to push/pull the flexible belts into the clamp slots as the material is not stiff enough to overcome the little impurities and stringing that often happens with PETG. One solution is to make the slots in the clamps bigger, as in Extrutim's larger slot versions , or in fuchsr's remix which also was made for TPU belts. My solution is to add a little pointy tab to the thick end of the belt: You can pull them through easily and then either leave the point end standing out or cut it off. No need to play with tolerances or larger slots in the clamps themselves. I only modified the 150 and 180 lengths (Mini+ owner here); it's a mix of CAD program and a rough stitching operation in Prusa Slicer.