Eber warhammer-style tank

Can this even be called warhammer style? Eber is a heavy tank able to effectively fight other tanks from a distance or up close depending on the main gun. It has a crew of 5, mass of about 60t and features a single main battle cannon and two pieces of secondary armament, one in a secondary turret. Assembly: To make the model you will need one of each file with the exception of 'track' (2x). To assemble the hull glue pieces 'front' and 'back' together, than glue 'connectors', two on each side in the rectangular holes. Next glue the sides to the hull. To assemble the tracks you need 2x 'track' . To make one track I recomend starting from the 17 link connected track segment, wich goes on the top (on return rollers, slide it in beneath the fender from the back). Next glue a 4 link connected track segment to the front top side (from return rollers to idler wheel), than glue 4 individual track segments to the idler wheel. Next glue a 6 link connected track segment to the bottom front side (from idler wheel to 1st roadwheel), than glue a 18 link connected segment to the bottom (on roadwheels). Next glue a 4 link connected track segment to the bottom back side (from roadwheels to sprocket), than glue on a 6 link connected track segment to the top back side (from return rollers to sprocket). Lastly glue 4 individual track segments to the sprocket to close the track. Make the other track the exact same way. All the secondary armament should friction fit in it's place, if not, try to chip off some plastic to loosen the connection.