EHEIM Installation Set Adapter (85 mm)

Compatible with EHEIM InstallationSET 1 (4004300) and InstallationSET 2 (4004310) This is a short 85 mm pipe adapter designed for the EHEIM Installation Set system. The part fits tightly onto the original EHEIM pipe and seals well even without the original O-ring. Because of the precise fit, it can be used directly as a connector or extension piece. In the provided example it is used as an adapter between the EHEIM installation set and a custom shrimp-safe filter basket, but it can also be used as a general pipe extension or connector within the EHEIM Installation Set system. The adapter maintains compatibility with the original EHEIM components, meaning that additional accessories can still be connected. Features: Compatible with EHEIM InstallationSET 1 (4004300) Compatible with EHEIM InstallationSET 2 (4004310) Length: 85 mm Tight friction fit on original EHEIM pipes Works without the original O-ring Can be used as a pipe extension or connector Wall thickness: 1.2 mm Print Settings: Material: PETG Layer height: 0.16 mm or 0.20 mm Nozzle: 0.4 mm Perimeters: 3 Infill: 15 % Supports: Not required The part was originally printed at 0.16 mm layer height, but 0.20 mm works perfectly as well and reduces print time. The increased wall thickness and the small internal reinforcement ensure sufficient rigidity while keeping the part lightweight. Example Use Case: The adapter can be used together with a custom shrimp-safe filter basket designed for EHEIM filters. It allows the basket to connect directly to the EHEIM Installation Set pipe system.