Eiffel Tower FDM printable

Intro Its the Eiffeltower not much to say other than this model can be printed with your glorified gluegun aka FDM printer like a Ender oder Prusa. 📷 Image redacted — claim this model to add your own media ko-fi.com/yell3d Printsetting Scaleits 220mm, 240mm upscale show be fineLayerheight0.2 or 0.3 (photo is 0.3)Perimeter2 or moreInfilldoes not really matter, i left is as 10% Gyroidtop layer 0.6mm+ so 2 for 0.3mm or 3 for 0.2 layer height bottom layersame as top, but more wont hurtSupportsnone, but a 5mm brim helps if you have warping Postprinting remove the brim, if any, with a hobby knive or deburring tool remove fine stringing with pulsing a small torch (like the this used for Crème brûlée ) torch the large arc's and push it in if you have weak cooling. If your Extruder sucks, buy one from a reputable China vendor like Trianglelabs BMG Mellow BMG (They have better Extruder, but these require custom print heads and only work as direct drive) Or feel free to buy from local 3d Vendors (see voron Discord), Amazon may not be the best place.