Electric Guitar with hot swappable pickups

Print your own electric guitar! This 3d model will allow you to print body of an electric guitar with hot swappable switches. I included blank parts if you want to use different pickups or configuration. The current model is made for double humbuckers. And a built in guitar pick holder. Recommendations for the print: make sure that he mid body , and mid mod parts have higher infill and wall count compared to other parts to ensure that the body wont bend under the pressure of the strings also lower gauge for the strings. For the best sound quality you might want to tape the cavities with copper tape For the grounding cable you will need one pin pogo connector mine is 8mm in diameter, you might need to change the size of the hole if you plan on using a different one Also 8 magnets will be needed mine were 10x5mm This body was made for a Harley benton guitar kit, it should be compatible with most parts. If you like this model please consider buying me a coffee: https://buymeacoffee.com/karmadon7