Elegoo Neptune 4/Pro Fan Shroud V5 with Beacon/Cartographer mount (holes widened for heat set inserts)
by JakeB · via Printables
| Format | STL |
| Category | Art |
| License | CC BY-NC-SA |
| Triangles | 34.0k |
| Uploaded | Apr 1, 2024 |
⬇ 91 downloads
❤ 32 likes
👁 2.5k views
Description
See: https://www.printables.com/model/813810-elegoo-neptune-4promaxplus-fan-shroud-v5-with-beac for details. Only difference is that you can use heat set inserts to mount the beacon rather than screwing directly into the plastic Additional materials not included with Elegoo printhead: 12x M3 threaded inserts (I used M3x4.0mm with a 4.6mm outer diameter) 6x M3x20 machine screws for fans 4x m3x5 machine screws for mounting beacon and LED (+another 2 if you mount an ADLX345 as well) Print settings: Wall count: 2 Wall generator: Arachne Supports: Manual tree supports (See screenshot attached for positioning) Material: Overture Orange ASA Infill: 10% cubic Still sorting out beacon configuration, will add to description when it's working consistently
AI Analysis: This is a bright orange plastic component designed to fit around a fan, providing airflow management and mounting points for additional hardware. It features widened holes for heat set inserts and slots for attaching beacon or cartographer mounts, commonly used in equipment.
Originally published on Printables
