Enclosure Ikea Lack for Creality Ender 3 S1/S1 Pro

Basic parts 2× IKEA Lack table 3× Plexiglass 445×542 mm, 3 mm thickness. 2× Plexiglass 220×535 mm, 3 mm thickness. Fasteners 24× pan head screw, 5×20 mm for table legs, holder plexiglass and spool holder. 4× screw 6×50 mm, for top corners. 4× screw M6×30 mm, for bottom corners. 3× screw M3×10 mm, for door knops and filement socket. 4× screw M3×18 mm, for door arms. 7x threaded inserts M3, for the hinges, door knobs and filement socket. 4x Four Pronged T Nuts Captive Threaded Inserts M6 for Wood Furniture, for bottom table. 4× neodymium magnet, 20×6×3 mm, for corners. 4× neodymium magnet, 20×6×2 mm, for door arms. Tools Screwdriver Allen key - 2,5mm Allen key - 6mm Hammer Superglue Drill + wood drill bits ø 2 mm, 5 mm, 6mm, 8 mm and 10 mm Tape measure Snap-off knife Ruler Pencil or marker Replaced the spool holder with this model (for CleverB)to sit inside: https://www.printables.com/model/369446-table-edge-spool-holder-ikea-lack-filament-spool-h And for filement sensor bracket I used this model(for LW design): https://www.printables.com/model/428965-ender-3-s1pro-filament-sensor-bracket