Ender 3 S1 Pro Bed Cable Chain Relief.

This model was built off the pre-existing design from @ Bananenminister . This is my first design so I may do tweaks in the future if problems persist but I have prototyped several models with PLA, PLA+ and PETG. and I would strongly suggest these to be printed in PETG since PLA variants may warp from heat over time. These are the quantites and parts you will need from @ Bananenminister 's files : 16-Clips 15-Chain links 1- Ground Plate 1-Hook (to secure ground plate) My Clamp in addition will require: 1-TOP Bed Cable Clamp 1-BOTTOM Bed Cable Clamp. 2-M3 Nuts (Pressed into recessed Bottom Bed Cable Clamp housing) 2- M3x10(or longer) Cap Screw Bolts. Printed at: 3 walls 20% Infill Printed with Supports. I have designed this bed cable clamp since there has been no full cable chain designs made for SPECIFICALLY the Creality Ender 3 S1 Pro since the cable is angled from the base of the printer to the bed plate. The Clamp will provide stress relief to the cable connection, while @ Bananenminister 's design will protect the bottom of the cable going to the mainboard. Please enjoy printing and I hope I can help save you the headache that many have dealt with worn out cables.