Extended PTFE (PC4-M10) Quick-Fitting for Prusa Drybox w/ Base

This will require: 4 x 3m Square Nuts 4 x 12mm 3m Screws 2 x 10mm 3m Screws 4 x 6mm x 12mm Magnets (might be able to go smaller) 2 x Wood Screws (to mount the base) The 12mm and square nuts hold the magnets in place. You put the magnets in by squishing them together so that the parts are flush, then tighten the bolts down. Make sure to install the magnets before mounting the main base to the box.