Fabric 20 Graphene - Extreme Flexibility - 7 Models

BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces pop off that is telling you there is a problem with your setup. Clean everything and try again, you can do it! Many Sizes to choose from. No supports, scales up but probably not down. Fun tactile/fidget toy. Satisfying. Prints well in TPU and is practically indestructible when printed with TPU. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised because they are impossible to remove. What makes this different? It uses 2 different tiles to achieve the weave. Printing much faster than earlier versions while keeping that same incredible flexibility. 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Help get me to Mars! ~ https://buymeacoffee.com/triplegworkshop