Fader Frigate (Benchy Knob)

Set sail on the sea of selecting. This is what happens when staff lines meet layer lines. The configurations are as follows: "normal" means that the flat of the shaft is towards the back of the boat (stern) "reverse" means the flat is towards the front (bow) "shallow" has a depth of .26" or a little over 6.5mm "deep" is 3/8" or 9.5mm About the printing .2mm layer height 2 perimeters (walls) 3 bottom layers 4 top layers 20% infill (I used grid) Have fun and Float On