Fastener for Logitech Extreme 3D Pro mount plate & Thrustmaster desk clamp

I made screw-on clips (with their nuts and the associated tool) to replace the zip ties. You may print two long clips, two short clips and eight nuts. The STL files are in the correct printing orientation. I printed in PETG with a 0.4 nozzle. I highly recommend using the thinnest thickness! I printed at 0.12 mm and had no problems with the screw threads. Also print the wrench and use it to tighten the nuts. But don't tighten too much or you'll break the clips (or the screw threads). Let me know if this is helpful!