極輕薄竹屎滑道(通用型) Feather Light 3D Printer Poop Chute (Universal)

極致輕薄化的竹屎滑道收集方案，用最少量的3D列印材料(少於60g)，快速列印就能搭建你的竹屎滑道，連結通往任何一個收集箱。 只需要用手折，使用掛勾將出口滑道掛上，用剪刀修剪出你需要的洞口寬度高度，折成左邊或右邊不同方向，就能適配你3D列印機的竹屎出口。 列印層高使用0.2mm，原先設計滑道薄件使用0.2mm厚，可再透過尺寸比例調整，將厚度增至0.4mm或0.6mm，增強滑道的強度和硬度。 This feather light weight printer poop collection solution uses minimal 3D printing material (< 60g) to quickly construct chute to collection bin in set place. Simply folding by hand, hang the exit chute using hooks, and trim it to the proper opening width and height with scissors. Fold it in either the left or right direction to fit your 3D printer's poop outlet. The design printing layer height is 0.2mm. The original design used a 0.2mm thickness for the chute sheets, and it can be further increase the thickness to 0.4mm or 0.6mm through scale adjustments of Z axis, enhancing the chute's strength and rigidity.