Filament Labels for Python Enclosure

There are 2 versions of the Filament Labels, 1 using 3x3mm magnets and the other uses the same as the Holder 6x3mm. I created these to replace the Python Enclosure Seals. I used the slicer to “cut” the parts, then using TinkerCad I added the holes for 3 and 6mm magnets. The lettering is embedded in the 1st layer. Use slicer’s “Color Painting” feature to fill in the lettering. 📷 Image redacted — claim this model to add your own media If you need a different than one the 7 provided; ABS, ASA, PLA, PLA Silk, PETG, TPU and Blank. These are the settings, fonts from font.google.com. Filament Font Settings: 📷 Image redacted — claim this model to add your own media 2-Line Font Settings: 📷 Image redacted — claim this model to add your own media Holder Font Settings: 📷 Image redacted — claim this model to add your own media To install the magnets, I used the “Magnet Applicator”. Verified that the “Label” part was attracted to the “Holder” then tapped them in with a 3mm driver. Magnet Applicator by peteb : https://makerworld.com/en/models/165335?from=search#profileId-181555 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media