FINISHED Motorized Horizontal Blind Box (luxaflex)

Look at the added pictures as how-to, if more help or explaining is needed, leave a message and I'm glad to help. I can add more pictures in the future if there is a need for it. For the settings I used : Wall loops : 5 Sparse infill pattern : Honeycomb Enabled Support : YES Style : Snug Ok ... New photo's added with a little description to it. IMG_0949 Total 3d printed boxes IMG_0946 Total 3d printed boxes + hardware to add IMG_0947 12v power connector IMG_0951 Motor Box with the stepper motor IMG_0953 Motor Box with the stepper motor modified (red wire dissembled and wire cut behind the blue cover *1 IMG_0956 Little 3x12mm mounting IMG_0957-64 The HALL-3144 sensor parts and how to assemble IMG_0965-73 All boxes prepared IMG_0975-83 Electronica assembling (tip shorten the motor wires for easier closing the compartments together) Yellow = 12v in Black = ground Red = 5v from L7805CV convertor (hope it's clear how to mount it) *2 *1 - seek for it on the internet how to get a stronger stepper *2 - I design it like this so that the blind-bottom keep the L7805CV cool (I use Thermal Paste with it), solder 3 wires with isolation before placing Maybe it's better or needed to add 2 capacitors for stability, but here it works without problems (good 12v adaptor helps too Peace and have fun !