First Layer Test

Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a perfect first layer as that is the most important layer. Once you get a good result with the simple shapes, try the extreme test. If you can get that to print without any gaps, then you have a perfect first layer. Print Settings Printer: Creality CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: None How I Designed This Fusion 360 Category: 3D Printing Tests