Fishing Net

A TPU replacement fishing net for your fishing net hoop or net frame. Here is a replacement net for your fishing net frame. I printed the net components in CC3D 72D TPU Filament and the snap-on pin and nut in PETG. The net shown in the pictures is approximately 20" wide x 22" long. It required the following quantities: 7 - Side-4x12.stl 2 - Btm-4x4.stl 1 - Btm-2x4.stl 120 - Snap nuts and snap pins If you have an odd number of Sides as shown in the pictures you will need to print one Btm-2x4 plus two Sides. Id you have an even number of Sides you will only need the Btm-4x4.stl. For example Six sides need two Btm-4x4's and Eight sides need 3 Btm-4x4's. Be sure to install the connecting nuts from the inside of the net so that the nuts or caps are on the outside so that there are no bumps from the nuts on the inside of the net that could harm the fish if you are practicing catch and release. The CC3D filament works really well and keeps the net compact when unloaded but stretches out nicely under load. I haven't caught a fish with this yet so my frozen fillets will have to do for demonstration purposes for now. If you try this in a different TPU please upload a make so we can all see how it looks/works.