Flashforge Adventurer 5M Pro Back Panel w/ 120mm fan grill

------ UPDATE Apr 2024 There's a great remix of this model by @shreid_521169 with improved air circulation and a few other adjustments, I recommend checking it out here: https://www.printables.com/model/838021-flashforge-adventurer-5m-ad5m-back-panel-w-120mm-4/comments ------ I wanted to install a Noctua NF-A12x15FLX fan on the Adventurer 5M Pro (as per Nathan Builds Robots), but I didn't feel like cutting a huge, ugly, gaping hole in the back panel of my brand new machine (as per Nathan Builds Robots). Instead, this is a rough replacement for the entire panel, far from perfect but hopefully it helps. It's all printable on the 5M Pro itself in five parts - I used solid PLA+ and it seems to be holding up just fine, as it doesn't seem to get too warm back there. Each panel joins together with M3 bolts (I used 10mm), then fixes to the 5M Pro with the stock bolts as per usual. Panel A is the one with the big fan, and from there it goes clockwise. Use the photos or the original panel for reference if you need, but I'm sure you'll be fine. Please note : I haven't tried installing the stock spool holder on this panel yet, and I don't know if it will take the weight, so proceed with caution if you try. If you do, and it works, please let me know (I take no responsibility for anything that goes wrong though!). Enjoy!