Flying Tourbillon Model 1.5 Remixed - Modified Fusion360

This is an improvement over the previous remix, I found many components not to fit perfectly so I modified them in Fusion 360. I neither own nor am I the original creator of this model. Some components might be a tight fit, but with a bit of sanding everything should work ( I found that a tight fit works better as there is minimal energy loss and the model works good) 4 things to keep in mind:- For the axels to hold the moving parts, etc. I used 1.75mm filament, just make sure to heat it and make it as straight as possible The only thing you need to modify on your slicer is the small spring (File name is SPRING), you will need to sale it down to 98% or 97% (Only the small spring), I found 97% scale to work best Use 0.2mm layer height, 30% infill for everything and 100% infill only for the 2 springs (gave me best result) This is the link for a Youtube short that I used to assemble (Please pay careful attention to the orientation of components especially the ROLLER component) https://youtube.com/shorts/u-yxMKSzCAY?si=JgVUPLQnF_v5-MYU Please feel free to share your feedback. Happy printing !!!