Flysky FS-i6 FS-i6x Case

This is a case and insert for the Flysky FS-i6 or FS-i6x. Sized to print on a MK3 or MK4. I glued some foam to the lid of the case and created an insert for the base of the case. The Case The case is a version of https://www.printables.com/model/258431-rugged-box-parametric With the following parameters 📷 Image redacted — claim this model to add your own media The STL files for the case are included . You need to print: 1 x Box Base 1 x Box Lid 2 x Box Latch Optional 1 x Seal in TPU To Assemble: 6 x M3 30mm Screws The Insert The flysky receiver sits in the insert at an angle because the transmitter handle is angled. For me this works well as I can place a cable underneath the transmitter. However if you want to change it, I have included the Fusion 360 file for the insert. The insert is a close but not tight fit. I would suggest some glue to hold in it place. If its too tight its extremely difficult to insert for a test fit. I had to break an insert to get it out.