Foxbat/Parallax Slamfire Trigger Lock

Pretty simple, pull the trigger back, then slide the lock down to keep the trigger in place. Push it up again to unlock. Works best with this auto-return slide: https://www.printables.com/model/1505996-foxbatparallax-slide-return You will need one extra 4-40 screw, and one extra ball detent (same as the ones in the foxbat kit). Assembly is simple, take the front and back parts and screw the 4-40 screws partially in so the two pieces are attached: 📷 Image redacted — claim this model to add your own media Next, drop a ball detent into the switch: 📷 Image redacted — claim this model to add your own media Put the slide in place with the detent on the side close to the barrel, then hold it in place and flip the whole thing over to put the plate into place on the back, and screw it down with another 4-40 screw: 📷 Image redacted — claim this model to add your own media Finally, drop the pin into the hole in the front block, and screw on the muzzle: 📷 Image redacted — claim this model to add your own media