Foxpup / Parallax / Foxbat Pumpgrip w/shroud

Interface between arms and grip is tight to provide som ekstra rigidity may requiere som sanding depending on printer tolerances, in my case they fit snuggly. The model has guides for drilling the shroud/grip to make it hardware compatible with most toy skrews. I used 4 standard Nerf skrews and 2mm drill bit. Pump arms are available as stl's from: https://www.printables.com/model/1068696-foxpup-foam-blaster Arms and grip are printed at 5 walls, 35% infill