Garden Hose Attachments

Although these are standalone accessories, they were created with my "Gutter Square Downpipe Diverter Twin Access" in mind : https://www.printables.com/model/1637492-gutter-square-downpipe-diverter-twin-access Parts Required To Purchase : OD Outer Diameter ID Inner Diameter CS Cross Section ( Thickness ) Plumber's Tape Around Male Thread For Seal https://www.amazon.co.uk/Plumbing-Teflon-Thread-Plumbers-Prevention/dp/B0G6D3M2VW/ O-Rings .... OD16mm x ID11mm x CS2.5mm https://www.amazon.co.uk/dp/B083GRDQ5M/ OD22mm x ID17.2mm x CS2.4mm https://www.amazon.co.uk/dp/B07XFN81RH/ OD26mm x ID18mm x CS4.0mm https://www.amazon.co.uk/dp/B0FCBQQKKJ/ Rubber Washers .... ½" Shower Hose Washer OD20mm x ID10mm x CS2.0mm https://www.amazon.co.uk/dp/B0FJSCV6WN/ 22mm Rubber Tap Washer OD24mm x ID13m x CS3.0mm https://www.amazon.co.uk/Washer-Tap-Rings-Set-Appliances/dp/B0F8VQML9Q/ 3D Printing Accessories : M22 Thread Female To Quick Connector Male 1 x O-Ring OD16mm x ID11mm x CS2.5mm 1 x ½" Shower Hose Washer M22 Make Inlet Cap 1 x O-Ring OD22mm x ID17.2mm x CS2.4mm Use Plumber's Tape Around The Thread For Seal M22 Thread Male ( No Nut ) To 22mm No Thread 50º Use Plumber's Tape Around The Thread For Seal M22 Thread Male To 22mm Straight 1 x O-Ring OD22mm x ID17.2mm x CS2.4mm Use Plumber's Tape Around The Thread For Seal M22 Thread Male To Quick Connector Male 1 x O-Ring OD16mm x ID11mm x CS2.5mm 1 x O-Ring OD22mm x ID17.2mm x CS2.4mm Use Plumber's Tape Around The Thread For Seal M22 Thread Male To M22 Thread Male 2 x O-Ring OD22mm x ID17.2mm x CS2.4mm Use Plumber's Tape Around The Thread For Seal M22 Thread Female Blanking Cap 1 x ½" Shower Hose Washer M22 Thread Male Blanking Cap 1 x O-Ring OD22mm x ID17.2mm x CS2.4mm Use Plumber's Tape Around The Thread For Seal 3D Printing Other Accessories : GHM Thread Male Adaptor To M22 Thread Male Adaptor M22 Side : 1 x O-Ring OD22mm x ID17.2mm x CS2.4mm Use Plumber's Tape Around The Thread For Seal GHT Thread Female To ½" BSP Thread Female Adaptor BSP Side : 1 x 22mm Rubber Tap Washer ( OD24mm x ID13mm x CS3.0mm ) GHT Side : 1 x 22mm Rubber Tap Washer ( OD24mm x ID13mm x CS3.0mm ) Quick Connector Male To Quick Connector Male 2 x O-Ring OD16mm x ID11mm x CS2.5mm