Garmin / Quarter Turn mount for Sy's Peglock system

See original instructions for the Garmin mount component here: See original instructions for the Garmin mount component here: https://www.printables.com/model/156670-3d-printing-friendly-garminwahoo-quarter-turn-inte . You'll need to print the lockring and spring from that model. I used PETG 0.2mm; 0.4mm nozzle, 3 walls. No supports required with my setup - the Peglock section printed fine laid flat with the slot facing upwards. Ensure the interface-housing .stl is also placed with the screw holes facing upwards. Screw hole is sized for M4 countersunk screw, cutting it's own threads in the Garmin mount section. .f3d file included for easy edits (many thanks to the original creator for sharing this originally). There is a suppressed 'Move' feature later in the Fusion timeline - unsuppressing this feature will rotate the slot in the mount 90 degrees to provide the orientation you want.