Geared Phone stand 2

Geared Phone stand 2 I wanted to completely redesign the original version, but I found that the original was well made, so I only changed a few things - a new gear pattern , a new more finely graduated locking mechanism , charging holes for a wider cable , larger width - it is a little more robust , I prepared two size versions - L and XL . The L version is for landscape phones with a width of 70-75mm The XL version is for landscape phones with a width of 76-80mm or even for small tablets. This version is a complete print-in-place , the tolerances between the parts /0.35-0.4mm/ should be suitable for most printers. I printed with a layer height of 0.2mm and a nozzle of 0.4mm. The filament is Prusament PLA Prusa Pro Green - a very nice color Do not use a brim when printing! The parts will then stick together and will not move! Before printing, I recommend gently roughening the printing plate with a scotch-brite sponge + isopropyl 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media