Geared slim wallet

A minimalist slim wallet for standard-size credit cards opened with a spring-loaded push button. The wallet should fit 5-6 cards, depending on their thickness. Two appearance versions available: plain and with a diamond pattern. Geared lever and spring provide a convenient way of opening the wallet with just one hand. Heavily inspired by a great design by Kenigan: https://www.thingiverse.com/thing:2756488 Designed for good printability on low-quality printers. Working mechanism demonstration: Print instructions No supports needed, should work with most printers and materials. In case of any problems with tolerances on your printer, try scaling the rack element up or down a little. The whole print consists of 4 elements: main frame, rack, lever and top. The wallet can be configured by choosing different models: with/without window, with/without diamond pattern, with/without a bearing for the lever. For the spring, use standard automatic pen spring, if the spring force is too large, cut the spring to suit your needs. If a version with a bearing is chosen, use a bearing with diameters: 10mm (external) x 3mm (internal) and a M3x6 setscrew (should screw in the frame tightly, if not use an adhesive to set the screw). Glue the top and bottom parts together with a standard cyanoacrylate adhesive (e.g. Super Glue), preferably rather viscous one.